Quality and certification

Quality and certification

Products tested and certified

Bollé Safety designs and markets personal protective equipment for eye protection for industrial use consistent with the AUS/NZS AS/NZS 1337.1.2010. Each marking corresponds to a very specific use. Certified by independent laboratories, this information guarantees protective eyewear quality and resistance.

All AS/NZS 1337.1.2010 approved eyewear requires the relevant lens markings to show that the product is approved to standards.

These markings will appear on both lenses of a dual lens product and only once on a single lens product.

Basic Standards

Personal eye protection AS/NZS 1337.1.2010.
Eye protection for occupational applications.

Lens Markings:

Lens marking must include:
- The scale number for filtering lenses (code).
- The manufacturer's name (logo or brand recommended by the manufacturer).

C. Liquid droplets or splashes.
D. Large dust particles > 5 microns as per EN166.
G. Gas and fine dust particles < 5 microns as per EN166.
M. Molten metal and hot solids as per EN166.


Mechanical strength symbols:
Marking on the lenses mandatory.
I. Medium energy impact, resists a 6 mm, ball at 45 m/s.
B. High energy impact, resists a 6 mm, ball at 120 m/s.
A. Extra High energy impact, resists a 6 mm, ball at 190 m/s.

WARNING
I. Maximum protection for glasses.
I. Maximum protection for goggles.
A. Maximum protection for face shields.

If the I, V and A symbols do not apply to both the lens and frame, then the lowest level must be assigned to the complete protective eyewear.

Bollé Safety is certified to AS/NZS 1337.1.2010.
Eye protection for occupational applications.